-
Foam Products
Rubber Products
We offer a wide range of industrial sheeting, available in full rolls of up to 10 metres including:
- SRS Natural Rubber – Commercial
- SRS Natural Insertion Rubber – Commercial
- SRS Natural Abrasion Resistant Rubber – Premium
- SRS EPDM Rubber – Premium
- SRS Black Nitrile – Premium
- SRS White Nitrile Rubber Food Grade – Premium
- SRS Neoprene Rubber – Commercial
- SRS Neoprene Insertion Rubber – Commercial
SRS is a provider of technical polymer products offering a comprehensive service from design through to production of industrial rubber products.
Vast experience in plastics and rubber manufacture for various applications and industries enables SRS to turn an initial concept into a precision engineered solution.
SRS Rubber Sheeting Properties
SRS Natural Rubber – Commercial
Natural Rubber Commercial Grade is recommended for commercial use.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.5 ± 0.05 | 65 ± 5 | 85 | 250 | 0°C to +70°C |
It can be used in many applications such as:
- Gaskets and seats (non-critical)
- Conveyor skirting and curtains
- Pads and strips (non-critical)
- Variety of sealing applications (non-critical)
Product Range
THNAT1
Thickness 1.6mm
Roll Size 10m x 1200mm
THNAT3
Thickness 3.2mm
Roll Size 10m x 1200mm
SRS Natural Insertion Rubber – Commercial
Rubber sheeting made to include a nylon insertion layer that gives it strength and shape holding characteristics. This rubber is used primarily for gasket manufacture. Although it’s very strong, natural insertion rubber should not be used for applications where heat or oil is present.
Technical Specifications
| Specific Gravity | Hardness (Shore A) |
Tensile Strength in Kg/cm2 (min) |
Elongation at Break % (min) |
Temperature Range |
| 1.45 ± 0.05 | 60 ± 5 | 30 | 250 | -30°C to +70°C |
It can be used in many applications such as:
- Primarily gaskets and seats (Automotive and Industrial)
- Pads and strips
- Variety of sealing applications
Product Range
THINS1
Thickness 1.6mm 1 Ply Roll Size 10m x 1200mm
THINS3
Thickness 3.2mm 1 Ply Roll Size 10m x 1200mm
THINS4
Thickness 4.5mm 2 Ply Roll Size 10m x 1200mm
THINS6
Thickness 6.4mm 2 Ply Roll Size 10m x 1200mm
THINS9
Thickness 9.5mm 2 Ply Roll Size 10m x 1200mm
SRS Natural Abrasion Resistant Rubber – Premium
Natural Abrasion Resistant is a premium natural rubber for abrasion, impact and corrosion resistance. Its range provides unmatched wear performance in the toughest abrasion environments. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 0.98 ± 0.05 | 38 ± 5 | 255 | 900 | -30°C to +70°C |
It can be used in many applications such as:
- Cold Bonding Applications (Industrial)
- Gaskets and seats
- Conveyer skirting and curtains
- Pads and strips
- Variety of sealing applications
Product Range
THNATABR01
Thickness 1.6mm 140sh Roll Size 10m x 1200mm
THNATABR03
Thickness 3.2mm 40sh Roll Size 10m x 1200mm
THNATABR06
Thickness 6.4mm 40sh Roll Size 10m x 1200mm
SRS EPDM Rubber – Premium
Ethylene Propylene Diene Monomer has an excellent operating temperature range of -30°C to +120°C. It is highly recommended for outdoor uses as it is extremely resistant to oxidation, U.V. rays and ozone.
It is resistant to many chemicals and solvents as well as corrosive chemicals.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.20 ± 0.05 | 60 ± 5 | 110 | 300 | -30°C to +120°C |
It can be used in many applications such as:
- Gaskets and seats
- Pads and strips
- Variety of sealing applications (particularly outdoor)
Product Range
THEP01
Thickness 1.6mm Roll Size 10m x 1200mm
THEP03
Thickness 3.2mm Roll Size 10m x 1200mm
THEP04
Thickness 4.5mm Roll Size 10m x 1200mm
THEP06
Thickness 6.4mm Roll Size 10m x 1200mm
THEP04
Thickness 9.56mm Roll Size 10m x 1200mm
SRS Black Nitrile – Premium
Nitrile rubber is a co-polymer of butadiene and acrylonitrile. It has good general resistance to oil along with good mechanical properties, especially tensile strength, flexing, compression set and impermeable to gases. It has moderate aging properties and good adhesion to metal.
It also displays a good resistance to inorganic chemical products except antioxidant agents and chlorine.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.30 ± 0.05 | 60 ± 5 | 600 | 300 | -30°C to +90°C |
It can be used in many applications such as:
- Gaskets and seats (particularly diesel and petrol applications)
- Pads and strips
- Variety of sealing applications
Product Range
THPVCN3
Thickness 3.2mm Roll Size 10m x 1200mm
THPVCN6
Thickness 6.4mm Roll Size 10m x 1200mm
White Nitrile Food Grade is a special type of nitrile rubber sheeting designed for the food processing and health industries. Like all other nitrile rubber sheeting it’s specially formulated to prevent oil attack, meaning its mechanical properties remain intact even in direct contact with oils and grease.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.45 ± 0.05 | 65 ± 5 | 100 | 600 | -30°C to +120°C |
It can be used in many applications such as:
- Gaskets and seats (Food, Beverage, Hygiene Industries)
- Conveyor curtains
- Pads and strips
- Variety of sealing applications (Food, Beverage, Hygiene Industries)
Product Range
THFOOD01
Thickness 1.6mm Roll Size 10m x 1200mm
THFOOD03
Thickness 3.2mm Roll Size 10m x 1200mm
THFOOD04
Thickness 4.5mm Roll Size 10m x 1200mm
THFOOD06
Thickness 6.4mm Roll Size 10m x 1200mm
THFOOD09
Thickness 9.5mm Roll Size 10m x 1200mm
SRS Neoprene Rubber – Commercial
Chloroprene also known as Neoprene has excellent mechanical and good abrasion properties even without reinforcing filters and has a reasonable resilience.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.50 ± 0.05 | 62 ± 5 | 75 | 345 | -40°C to +125°C |
It can be used in many applications such as:
- Gaskets and seats
- Conveyor skirting and curtains
- Pads and strips
- Variety of sealing applications
Product Range
THNEO01S
Thickness 1.0mm Roll Size 10m x 1200mm
THNEO01
Thickness 1.6mm Roll Size 10m x 1200mm
THNEO03
Thickness 3.2mm Roll Size 10m x 1200mm
THNEO04
Thickness 4.5mm Roll Size 10m x 1200mm
THNEO06
Thickness 6.4mm Roll Size 10m x 1200mm
THNEO09
Thickness 9.5mm Roll Size 10m x 1200mm
THNEO12
Thickness 12.7mm Roll Size 10m x 1200mm
THNEO15
Thickness 15.9mm Roll Size 10m x 1200mm
THNEO19
Thickness 19.1mm Roll Size 10m x 1200mm
SRS Neoprene Insertion Rubber – Commercial
Rubber sheeting that is made including a nylon insertion layer that gives it strength and shape holding characteristics. This material should be used in situations where resistance to heat and oil is required.
This rubber is used primarily for gasket manufacture.
Technical Specifications
| Specific Gravity | Hardness (Shore A) | Tensile Strength in Kg/cm² (min) | Elongation at Break % (min) | Temperature Range |
| 1.47 ± 0.05 | 62 ± 5 | 40 | 280 | -30°C to +110°C |
It can be used in many applications such as:
- Gaskets and seats
- Pads and strips
- Variety of sealing applications
Product Range
THINSNEO1
Thickness 1.6mm 1 Ply Roll Size 10m x 1200mm
THINSNEO3
Thickness 3.2mm 1 Ply Roll Size 10m x 1200mm
THINSNEO4
Thickness 4.5mm 2 Ply Roll Size 10m x 1200mm
THINSNEO6
Thickness 6.4mm 2 Ply Roll Size 10m x 1200mm
Cut lengths, strips and custom shapes are available on request
Whilst every effort has been made to supply accurate information this specification should be used as a guide only. Skellerup Rubber Services Ltd reserves the right to make specification changes without notice or without incurring liability.